例句與造句

1. At one end of the shade roller there is a flat pin.
2. The 600 series plug has up to three flat pins plus a non-conducting spigot.
3. The pre-1989 system has three flat pins in a Y-shape, with line and neutral apart.
4. The design chosen as the British Standard was the flat pin system now known as BS 1363.
5. :Seems to be a mixture of flat pin US style ( A ) and round pin Euro style ( C ) plugs.
6. It's difficult to find flat pin in a sentence. 用flat pin造句挺難的
7. The type 15 plug and socket has 3 round pins of 4 mm diameter, plus 2 flat pins ( for L2 and L3 ).
8. The type 25 plug and socket has 3 rectangular pins, 4 mm x 5 mm, plus 2 flat pins ( for L2 and L3 ).
9. Hubbell's catalogue of 1906 includes various three-way adaptors similar to those shown in the US776, 326 patent, but modified for use with the coplanar flat pin plugs.
10. The reason the spring does not pull the shade back up immediately is because a pawl-and-ratchet assembly at that end of the roller catches and holds the flat pin in position when you stop pulling the shade down.
11. The Wound Badge in silver was made ( before 1942 ) from silver-plated brass, and ( after 1942 ) from lacquered zinc, and had a solid reverse with either a needle pin or a broad flat pin bar.
12. This flat pin is connected to a spring inside and the pin cannot turn as you pull the shade down, so it winds up the spring on the inside to increase tension as you pull the shade down.
13. Hubbell evidently soon found the round pin design unsatisfactory as a subsequent patent US 774, 251 filed on May 27, 1904 shows lampholder adaptors similar to those of his first patent for use with plugs having coplanar flat pins.
14. One of the reasons behind the adoption of that particular design was that it was cheap to make; the flat pins could be easily stamped out of sheet brass, in contrast to round pins or thicker rectangular ones used in other countries.
15. As from 3 April 2005 the live pins of every 10 amp and 15 amp flat pin plug sold were required to comply with the requirements of AS / NZS 3112 : 2000, which states that the live pins must be insulated, as shown in the picture.